The set consists of a turned gun barrel, turned
machine gun barrel and resin parts: mantlet,
armoured plate, barrel holding and the adapter for
Tamiya M4 kit (No 190).
Gun barrel M3 was based on the construction of
French field gun of World War I. It was priced
because its high-explosive shells were very
effective, but it seemed to be helpless in combat
against German tanks: Panthers and Tigers.
Our set includes the early version of the gun with
typical for it "funnel" and initial
model of armoured plate M34.
NOTE: measurments taken on a several Sherman tanks
showed that the hole for the mantlet, which is
included in Tamiya's kit, is much too big. Because
a lot of modellers prefer Sherman kits by
Tamiya,we added a special adapter to our set; it
is going to correct the mentioned error. |
Gun Barrels for US
Tank M4 Sherman
(initial model)
£9.99
B35-K03
Qty 2
|
The set includes a turned barrel
and resin elements: a muzzle brake, mantlet and
armoured plate.
Soviet D-25T gun was supposed to be a match for
German Tigers and Panthers. During WWII it was the
biggest gun assemblied on the serial produced
tanks. Although its calibre was powerful, the
parameters were average,and heavy ammo didn't let
the crew make more than two shots a minute during
combat.
On our mantlet we made a correct collar holding a
barrel and cast texture with bolts. The parts of
the muzzle brake also includes corrected details
which you can find on the original one. |
122mm D-25T Gun Barrel for Soviet Tank JS-2
B35-096
£11.99
Qty 1
|
 |
45mm m-42 / Pak 184(r)
Gun Barrel for Soviet antitank gun
B35-094
£3.00
Qty 1
|
 |
75mm PaK 42 L/48 Gun
Barrel for German Tank Destroyer Jagdpanzer IV
(final model)
B35-093
£7.50
Qty 4
|
 |
75mm PaK 42 L/48 Gun
Barrel for German Tank Destroyer E-10
B35-091
£7.50
Qty 1
|
The set consists of turned barrel, photo etched
parts and resin elements: armoured plate and
mantlet.
Our armoured plate has the cast texture; the
mantlet has the correct the barrel holding, cast
texture and the welds.
Gun L-11 was the equipment of the first series of
tanks KW-1, but, the same as in T-34, because of
its complicated and damage construction, it was
replaced with gun F-32 quickly. |
76,2mm L-11
Gun Barrel for Soviet Tank KW-1
B35-089
£7.50
Qty 2
|
The set consists of a turned barrel and resin
parts: mantlet and armour plate.
Our set includes standard type of the plate, used
in April - May of 1944. The mantlet has the
details typical for Vomag company; it includes
correct bolts, cast texture, cast number and
working with a gas burner.
German Jagdpanzer IV was one of the most powerful
Tank Destroyers of WWII. Massive downward armour
and tried gun made it very dangerous for enemies. |
75mm PaK 42 L/48
Gun Barrel for German Tank Destroyer Jagdpanzer IV
(Standard Model)
B35-082
£7.50
Qty 2
|
 |
75mm PaK40
Gun Barrel for German Anti-tank Gun
(Muzzle Brake Late Model)
B35-077
£11.99
Qty 1
|
The set consists of a turned barrel and resin
mantlet.
Our mantlet has corrected tackbolts and welds.
In German strategy of Blietzkrieg Assault
Artillery was very important and StuG III was the
company for German soldiers since campaigne in
France to the end of the war. |
75mm StuK 37 L/24
Gun Barrel for German SPG StuG III Ausf.A-E
B35-071
£6.00
Qty 6
|
The set consists of a turned barrel, PE parts and
resin elements: an armoured plate and mantlet.
Our armoured plate has a cast texture, we also
made the correct tackbolts and welds on the
mantlet.
F-32 gun was the standard equipment for KW-1 in
1940-41. |
76,2mm F-32
Gun Barrel for Soviet Tank KW-1
B35-070
£7.50
Qty 1
|
The set consists of a turned barrel and resin
parts: armor plate, mantlet and driver hatch.
Our set includes the early type of 20K gun (used
also in T-26 and BT 5/7 tanks) and the early
driver hatch with direct vision slot (Zavod 178).
Soviet Light Tank T-70 was the successor of T-60
tank. Unfortunately, in the same time the German
units started to use excellent anti-tank guns
PaK40 and long-barreled tank guns KwK40.
Because of the huge losses Soviet tankers called
T-70 tanks BM-2 (bratskaja mogila dla dwoich). |
45mm 20K Obr.32
Gun Barrel for Soviet Tank T-70 Early Model
B35-069
£6.00
Qty 2
|
The set consists of a turned
barrel, PE parts and resin elements: a mantlet and
armoured plate.
Because of huge war needs, in spring of 1942 they
started making a new better turret for T-34.
Turrets made in different factories had different
details, but armoured plate and mantlet were the
same.
The set is based on blueprints. |
76.2mm F-34
Gun Barrel for Soviet Tank T-34/76 with Hexagonal
Turret
B35-066
£7.50
Qty 1
|
The set consists of a turned barrel
and a resin mantlet.
The StuH42 howitzer was a light howitzer leFH 18
remade to assembly on SPG StuG III. Because the
attacking infantry needed more fire support, it
was decided to arm StuG with a howitzer.
Our set includes a late version of it with no
muzzle brake and casted mantlet called Saukopf (Pighead). |
105mm StuH 42 L/28
Gun Barrel for German StuH 42
(Late model with Saukopf mantlet)
B35-065
£6.00
Qty 3
|
The set consists of a turned barrel and a resin
parts: armour plate and mantlet. The mantlet
includes correct bolts, cast texture, cast number
and working with a gas burner.
Since September of 1944, German Jagdpanzer IV was
armed with a long-barreled gun, the same as famous
Panther.
Because it was low and had a huge fire range, it was
able to destroy Allied tanks from the ambush. |
75mm Pak 39 L/48 Jagdpanzer IV
(Initial model)
B35-063
£7.50
Qty 1
|
The set consists of a turned barrel and a resin
parts: armour plate and mantlet.
Tank destroyer Hetzer was based on the Czech tank
LT-38 chassis and was supposed to replace towed
anti-tank guns used by Wehrmacht units.
Our set includes a first version of PaK39 gun
threaded for a muzzle brake. The late type mantlet,
called Leichte Saukopf (Light Weight Pighead),
includes correct bolts, cast texture and a lower
face with a barrel handle. Armour plate has cast
texture, cast number and working with a gas
burner. |
75mm Pak 39 L/48
Hetzer
(Late model)
B35-062
£7.50
Qty 2
|
The set consists of a turned barrel with muzzle
brake, photo-etched elements and a resin mantlet
with reconstructed details such as welds and
bolts.
Since the december of 1942 German Assault Guns
Units (Sturmgeschutz Abteilung) were armed with
version G which were the most common version of
SPG III.
Our set has an early version of the mantlet made
of welded armour plates. This set also includes
final version of a muzzle brake used with StuK40
gun.
We designed the mantlet the way which lets you use
it for all kits available (Dragon, Tamiya). |
75mm StuK 40 L/48 – Gun Barrel for German SPG
StuG III G
(Final model with Std mantlet)
B35-061
£11.99
Qty 1
|
The set consists of a turned barrel
with muzzle brake, photo-etched elements and a
resin mantlet with reconstructed details such as
welds and bolts.
Since the december of 1942 German Assault Guns
Units (Sturmgeschutz Abteilung) were armed with
version G which were the most common version of
SPG III.
Our set has an early version of the mantlet made
of welded armour plates. This set also includes
late version of a muzzle brake used with StuK40
gun.
We designed the mantlet the way which lets you use
it for all kits available (Dragon, Tamiya). |
75mm StuK 40 L/48 – Gun Barrel for German SPG
StuG III G
(Late model with Std mantlet)
B35-060
£11.99
Qty 2
|
The set consists of a turned barrel with muzzle
brake, photo-etched elements and a resin mantlet
with reconstructed details such as welds and
bolts.
Since the december of 1942 German Assault Guns
Units (Sturmgeschutz Abteilung) were armed with
version G which were the most common version of
SPG III.
Our set has an early version of the mantlet made
of welded armour plates. This set also includes
middle version of a muzzle brake used with StuK40
gun.
We designed the mantlet the way which lets you use
it for all kits available (Dragon, Tamiya). |
75mm StuK 40 L/48 – Gun Barrel for German SPG
StuG III G
(Mid model with Std mantlet)
B35-059
£11.99
Qty 1
|
The set consists of a turned barrel with a muzzle
brake, photo-etched elements and a resin mantlet
with reconstructed details such as welds and
bolts.
Since the december of 1942 German Assault Guns
Units (Sturmgeschutz Abteilung) were armed with
version G which were the most common version of
SPG III.
Our set has the early version of mantlet, which
were made of welded armour plates. This set also
includes early version of the muzzle brake used
with StuK40 gun.
We designed the mantlet the way which lets you use
it for all kits available (Dragon, Tamiya). |
75mm StuK 40 L/48 – Gun Barrel for German SPG
StuG III G
(Early model with Std mantlet)
B35-058
£11.99
Qty 2
|
 |
37mm Skoda A7
Gun Barrel for Czech Tank Lt.38 / Pz.Kpfw.38(t)
art. B35-054
£4.00
Qty 3
|
 |
75mm M3
Gun Barrel for US Tank M4 Sherman with the M34A1
Mantlet
B35-052
£7.00
Qty 2
|
 |
122mm D-25T
Gun Barrel for Soviet Tank JS-3
B35-050
£9.99
Qty 1
|
 |
122mm D-25T
Gun Barrel for Soviet Tank JS-2 with the Mantlet
Late Model
art. B35-046
£9.99
Qty
2
|
 |
75mm KwK 40 L/48
Gun Barrel for German Tank Pz.Kpfw.IV Ausf.H/J
(Muzzle Brake Mid Model)
art. B35-043
£9.99
Qty 1
|
 |
75mm PaK 39 L/48
Gun Barrel for German Tank Hunter Hetzer (Initial
Model)
art. B35-037
£6.00
Qty 1
|
The set consists of a turned barrel with muzzle
brake, photo-etched elements and a resin mantlet
with a nice cast texture.
To make an armor better and more effective, since
November 1943 a welded gun mantlet was replaced
with moulded one piece part, named Saukopf (Pighead).
Because Saukopf's thickness was larger than the
welded mantlet, Stug's hardness was much better.
Our set is a final version of Saukopf and icludes
coaxial MG which was used since October 1944.This
set includes one of three versions of a muzzle
brake used with StuK40 gun.
We designed the mantlet the way which lets you use
it for all kits available (Dragon, Tamiya). |
75mm StuK 40 L/48
Gun Barrel for German SPG StuG III G and StuG IV
(Final model with Saukopf mantlet)
art. B35-033
£9.99
Qty 1
|
 |
76,2mm F-34
Gun Barrel for Soviet Tank T-34/76 Pattern 1941
art. B35-026
£6.00
Qty 2
|
The set consists of a turned barrel with a muzzle
brake, a resin mantlet and photo-etched parts. It
is the first version of Jagdpanther armament: one
piece barrel with a large muzzle brake from Tiger
I.
We made an imitation the cast texture.
To make early version of TAMIYA's Jagdpanther we
recommend our armoured plate R35-005. |
88mm PaK 43/2 L/71
Gun Barrel for German Tank Hunter Jagdpanther
(Early model)
art. B35-025
£9.99
Qty 1
|
The set consists of a turned barrel and a resin
mantlet.
The StuH42 howitzer was a light howitzer leFH 18
remade to assembly it on SPG StuG III. Because the
attacking infantry needed more fire support, it
was decided to arm StuG with a howitzer.
Our set includes a late version of it with no
muzzle brake, but with a standard mantlet made of
rolled armoured plates. We corrected welds on the
mantlet. There are also bolts fixing the finishing
nut of it. |
105mm StuH 42 L/28
Gun Barrel for German StuH 42
(Late model with standard mantlet)
art. B35-024
£6.00
Qty 6
|
The set consists of a turned barrel with a muzzle
brake, a resin mantlet and photo-etched parts.
It is designed for early King Tigers with one
piece barrel and heavy-weight muzzle brake adopted
from Tiger I Tank.
The mantlet made by us has proper shapes and
dimensions. Because all the King Tigers Porsche
had Zimmerit, our mantlet has it as well.
The mantlet is easy to assembly on the Tamiya and
Dragon kits. |
88mm KwK 43/2 L/71
Gun Barrel for German Tank Pz.Kpfw.VI Tiger B
Porsche-Turm
art. B35-022
£9.99
Qty 1
|
This set consists of a turned barrel with counter
weights and resin parts: a mantlet and machine
gun.
This barrel was a 1942-44 standard type of a tank
gun used in British tanks. This set lets you build
such British tanks: Churchill Mk III, Churchill Mk
IV, Crusader III and Cromwell Mk I.
To make shooting faster, this barrel of Mark V gun
was much longer than Mark III.
British tanks had a lot of different types of
counter weights; in that set you can find two
different types of them. Of course, you can
assembly the barrel with no counter weight at all;
it depends on a model you are interested in
building. |
6pdr OQF Mk V
Gun Barrel for British Tanks (Mantlet Late Model)
art. B35-019
£6.00
Qty 2
|
This set consists of a turned barrel with counter
weights and resin parts: a mantlet and machine
gun.
This barrel was a 1942-44 standard type of a tank
gun used in British tanks. This set lets you build
such British tanks: Churchill Mk III, Churchill Mk
IV, Crusader III and Cromwell Mk I.
Mark III was an older and shorter version of that
gun.
British tanks had a lot of different types of
counter weights; in that set you can find two
different types of them. Of course, you can
assembly the barrel with no counter weight at all;
it depends on a model you are interested in
building. |
6pdr OQF Mk III
Gun Barrel for British Tanks (Mantlet Late Model)
art. B35-018
£6.00
Qty 1
|
The set consists of turned elements: a barrel,
muzzle brake and counter weight, and resin parts:
a mantlet and machine gun. We made the cast
texture on it and corrected a position of a hole
for a gun.
The mantlet was used for British Cruiser Tank
Cromwell |
75mm OQF MkV
Gun Barrel for British Cruiser Tank Cromwell
art. B35-015
£9.99
Qty 1
|
The set consists of a turned barrel and resin
mantlet. Because of manual assembling of Matilda
tanks, mantlets were different in many vehicles,
but the open space near a coaxial machine-gun was
characteristic for all of them.
What's more we rearranged the opening of gun sight
from the plastic model and the cast texture. |
2pdr Early Model
Gun Barrel for British Tank Matilda II
art. B35-004
£6.00
Qty 1 |
The set consists of a turned barrel and resin
mantlet. The mantlet has a more correct diameter
of a hole clamping a gun, more regular holding
down bolts, and imitation the cast texture and
working with a gas burner. |
85mm D-5S
Gun Barrel for Soviet SPG SU-85
£6.00
B35-002
Qty 7
|
